Skip to content
On this page

Everyday bookkeeping

Manual entry and shortcuts

Enter a journal by hand quickly: accept suggestions, reuse amounts, split costs across cost centers and arrange lines without leaving the keyboard. You choose the accounts and the figures.

Open Book → Add Journal Entry, or open a journal from its Ring to edit it. Fill in the date and description, then build the lines. The examples on this page use sample data and change nothing in your books.

Journal Entry reference guide

Use the sample form below to find every control in the Journal Entry window. Hover, focus or tap a numbered marker to read what it does, then try it. Changes stay on this page, and the sample fill uses no AI credits. For a single page to print or forward, download the reference guide (PDF).

Practice with sample data · Hover, focus or tap a number for help. Changes stay here.

Journal Entry

Net total: HKD 20,000.00 Debit

Enter: next line · Shift+Enter: previous · ⌘/Ctrl+Enter: check sample · drag a blue corner to copy a value

Account
DebitCredit
CcySegment
HKD
HKD
HKD
HKD
Total:
20,003.0020,005.00
SUGGESTED · 1 line
💡 Utilities Expense | Debit | 3,000.00 HKD | Admin
AccountBeforeThis journalResult
Rent Expense62,500.0020,000.0082,500.00
Bank Fees310.003.00313.00
HSBC Saving-92,798.00-20,005.00-112,803.00

Illustrative opening balances. This journal is included from its month onward.

Read all 18 reference notes
Ref.ControlHow to use it
1AccountChoose the account for each line. If it does not exist yet, use + New in the account list to create it without leaving the journal.
2Segment / allocationAssign a segment to the line. Open the arrow beside Segment to split the line with a saved allocation driver.
3Amount / keyboard shortcutsEnter a debit or credit amount. In the amount box, B balances the journal using this line, ↑ / ↓ reuse the amounts of other lines, and Enter moves to the next line (adding one after the last). Shift+Enter goes back a line and ⌘/Ctrl+Enter saves.
4Copy values up / downHover a cell to show the fill handle in its lower-right corner. Drag it up or down to copy the value into other lines. Press Escape to cancel.
5Toggle Debit / CreditClick the empty side of the line (Debit or Credit), or press Space in the amount box, to move the amount to the other side.
6Black weightClick the weight icon to set this line's amount so the journal balances.
7Totals / differenceCompare total debits and credits. Click the red difference to add a line for it, then choose that line's account.
8Send difference to Not SureBook the remaining difference to Not Sure when you will decide its account later.
9Reorder linesDrag the grip at the left of a line up or down and release. The grip appears when you hover over the line.
10Insert: copy line aboveClick the divider under the account (the copy icon) to duplicate the line above.
11Insert: difference lineClick the divider under the amounts to insert the difference between the two neighboring lines. Both need an amount in the same currency.
12Insert: blank lineClick the + at the right of the divider to insert a blank line.
13Combine selected linesTick the checkboxes beside the lines, then click Combine selected to merge them into one net amount. The lines must share the same account, currency and booking classification.
14Selected lines: net totalRead Net total in the selection bar for the combined amount, currency and Debit or Credit side of the selected lines.
15Suggested journal entriesReview the suggested accounts and amounts. Click + to add one suggestion, or Add all (or press Tab) to add the set.
16Balance previewOpen Preview account balance and choose a month. Compare Before, This journal and Result for each affected account.
17Expand line detailsClick the arrow at the right of a line to show more fields, such as subledger and particulars. Click again to collapse them.
18Fill from text or a fileClick the speech-bubble button, then type or paste text, or add one JPG, PNG, WebP or PDF file (up to 5 MB), and choose Fill journal. Review the proposed lines before you save. This uses AI credits.

Balancing (3, 6) is available when the journal is out of balance and every line uses the same currency. Check the adjusted amount before you save. The manual tools use no AI credits; only fill from text or a file (18) does.

Keyboard shortcuts

On Windows and Linux, use Ctrl where the Mac column shows ⌘.

In an amount box

ActionMacWindowsNotes
Balance the journal with this lineBBOnly while the journal is out of balance and all lines share one currency.
Switch between Debit and CreditSpaceSpaceKeeps the number you typed.
Reuse the amount of another line↑ / ↓↑ / ↓Steps through the other lines in their current order.
Go to the same column on the next lineEnterEnterOn the last line, it adds a new line. Also works in other cells when no list is open.
Go to the same column on the previous lineShift + EnterShift + Enter

Anywhere in the journal editor

ActionMacWindowsNotes
Save the journal⌘ EnterCtrl EnterSame as Add or Update.
Undo⌘ ZCtrl ZSteps back through unsaved edits.
Redo⇧ ⌘ ZCtrl Shift Z or Ctrl Y
Paste cells from a spreadsheet⌘ VCtrl VClick the first cell to fill, then paste. Up to 1,000 rows.
Copy a cell into the line above or below↑ / ↓↑ / ↓With the cell's fill handle focused. Press Tab until the small triangle at the cell's lower-right corner is focused.
Cancel a fill dragEscEscWhile dragging the fill handle.
Generate lines from text⌘ EnterCtrl EnterIn the fill-from-text box. Same as Fill journal.

Lines, suggestions and panels

ActionMacWindowsNotes
Pick up a line, move it, drop itTab to the grip, Space, ↑ / ↓, SpaceTab to the grip, Space, ↑ / ↓, SpaceThe order is saved with the journal.
Add all suggested linesTabTabOnly while suggestions are showing and the cursor is not in a text box.
Browse other suggestions← / →← / →Same conditions, when there is more than one.
Resize the document and journal panels← / →← / →With the divider focused. Hold Shift for larger steps.

Try the manual-entry shortcuts

Each example below starts with its own sample journal, so you can see exactly what one action changes.

Interactive practice · sample data

Tap the suggested Bank line to add it to this sample draft.

Sample journal · HKD
AccountDebitCreditSegment / order
Rent Expense1000—

Suggested journals: accept what fits

Start with a description and an account. When Ringbook finds a pattern in your earlier entries, grey suggested lines appear beneath your entry. They can propose counterpart accounts, amounts and, where available, segment or subledger details.

The grey Bank line is only a suggestion until you accept it; nothing is posted until you save.
  • Click a suggested row or its + to add that line to your draft.
  • Add all, or Tab while suggestions are showing, adds the whole set. It adds draft lines and posts nothing.
  • Use the suggestion arrows to browse alternatives and × to dismiss a set that does not fit.
  • Check accounts, sides, currency and amounts before you save. An earlier journal is a starting point, not a promise that this event is booked the same way.

Example: choose Rent Expense and enter 8,000. A suggested Bank credit of 8,000 saves you picking the counterpart again. Accept it only if the rent was paid from that account.

To generate journals from documents, set up reusable rules or use Companion, read the AI guide.

Three ways to insert a journal line

Move to the divider between two lines. Its three regions do different jobs.

Annotated journal editor: the left divider duplicates the row above, the middle divider inserts the difference between the neighboring amounts, and the right divider adds a blank line.

Where to clickWhat it doesWhen to use it
Left: copy icon, under the accountInserts a copy of the line above, including account, amount, currency and other details.Another similar expense: copy it, then change the amount or segment.
Middle: highlighted divider under the amountsInserts the amount that results from the two neighboring lines, when their amounts and currency allow it. You then choose the account.Filling a local gap without working it out first.
Right: +Inserts a blank line at that position.Adding a different account without reordering the journal.

How the middle action works: Debit 100 above and Debit 200 below inserts Debit 100. Credit 100 above and Credit 200 below inserts Credit 100. Debit 100 above and Credit 200 below inserts Debit 100, which closes the gap between that pair. It looks only at the two neighbors, not at the difference for the whole journal.

Reuse amounts with ↑ and ↓

Click in an amount box and press ↑ or ↓ to step through the amounts of the other lines, in their current order. The amount in the box is replaced and its Debit or Credit side stays the same.

The arrow key copies the amount of another line into the box you are typing in.

Example: Rent Expense has a debit of 8,000 and the Bank line below it is still empty. Click the Bank amount and press ↑: 8,000 appears. Press ↓ to return to what you had. Lines with no amount are skipped, and typing a new number starts a fresh sequence.

It is a way to reuse figures already on screen, not a +1 / −1 stepper. Check the currency before you reuse a figure.

Split a cost across cost centers

Ringbook calls cost centers Segments. Assign one with the Segment field, or use the ▾ beside it to split a line with a saved allocation driver.

  1. Open Chart of Accounts and select the Segments tab. Set up segments and driver weights there. A driver such as Head Count or Office Area needs positive weights for at least two segments.
  2. Enter the expense account and amount in the journal.
  3. Open the ▾ beside Segment and choose the driver. Ringbook replaces the line with one line per participating segment.
  4. Check the amounts and the total. Use Undo if you chose the wrong driver.
One saved driver replaces the line with one line per segment; the total stays HKD 8,000.00.

Example: Studio North splits Rent Expense of 8,000 with an Office Area driver of Design 60% and Admin 40%. The journal then shows Rent Expense 4,800 for Design and 3,200 for Admin. The Bank credit stays 8,000.

Once drivers exist, one menu choice applies the split without retyping any amount. It is a menu action, not a keyboard shortcut. Some special or combined lines cannot be split; expand a combined line first.

Arrange lines in an order that makes sense

Drag a line's grip to move it. Keep the expense lines together, put the payment last, or follow the order of the supporting document.

Move the settlement line to the end so the journal reads like the receipt.

To use the keyboard instead: Tab to the grip, Space to pick up, ↑ / ↓ to move, Space to drop.

The order is saved when you click Add or Update and is kept when you reopen the journal. It is separate from how the Book table is sorted or grouped.

Combine repeated accounts

Below the editor, Combine same account lists repeated accounts that can be merged, with their net totals. Click Combine on an account to collapse those lines, and Expand to restore them while you are still editing.

  • Lines must have the same account, the same currency and compatible booking classifications. Two accounts with the same name do not qualify.
  • Amounts on the same side add up. Opposite sides net: Debit 300 and Credit 100 on one account become Debit 200.
  • A group that nets to zero stays as separate lines. Incomplete lines and FX gain/loss lines are not offered for combining.
  • Check segment, subledger and memo before you save. Details shared by every line carry over; differing details may not survive on the merged line.

Combining changes the lines that will be saved. Book's Grouped display mode only changes how entries are shown. Expand or undo before saving if you need the original lines.

Combine only selected lines

Tick the checkboxes of the lines you want to merge. Combine selected becomes available when the selection forms one eligible account and currency group. Other lines stay as they are.

Example: Courier Expense has three debits: 40, 60 and 80. Select the first two and combine them into 100. The 80 line is untouched. Net total in the selection bar shows the combined amount for each currency.

Balance, undo and finish

ControlUse it for
Row balance controlSets that row to the amount that balances the journal. Check the account and side afterwards.
Total differenceWhere offered, adds a line for the journal's whole difference. Then choose its account.
Undo / RedoSteps back or forward through edits, including line changes, suggestions, splits and combining.
Add / UpdateSaves the reviewed journal with its line order and changes.

Before saving, check the date, description, accounts, currency, amounts, segment or subledger details and the supporting document. A zero difference shows that the amounts balance. It does not show that the classification is right.

If you do not know the final account yet, use the offered recovery option or Not Sure and finish the classification later. Related reading: the Book and journal guide, the AI recovery guide and tips and shortcuts.